usb-ml-mon08

　　usbmultilink08e

　　p&e usb mon08 multilink cable for the 68hc08 mon08

　　p&e usb multilink mon08交互式转换接口(usb)

　　支持freescale 68hc08

　　计算机usb接口( windows 98se/2000/xp/2003 )

　　计算机usb供电

　　通过mon08向目标板提供2v，3v和5v 125ma电源

　　目标板频率1mhz-8mhz

　　对一些hc08 设备自动判断频率+全兼容能力

　　自动判断hc08设备的频率

　　随机软件：pkg08sz

　　p&e’s usb mon08 multilink (part# usb-ml-mon08) is a debug interface which allows a pc access to the monitor mode on freescale hc08 microcontrollers. it connects between a usb port on a windows machine and the standard 16-pin “berg” debug connector on the target.

　　by using the usb mon08 multilink, the user can take advantage of the monitor mode to halt normal processor execution and use a pc to control the processor. the user can then directly control the target’s execution, read/write registers and memory values, debug code on the processor, and program internal or external flash memory devices.

　　the usb mon08 multilink works with p&e microputer system's in-circuit debugger and flash programmer to allow debug and flash programming of the target processor. p&e has a set of interface libraries allowing the user to write their own windows based application which interacts with p&e's debug interface.

　　note: the multilink cable is only remended for development. for production usage, see the cyclone pro stand alone programmer and debug interface.

　　features:

　　· usb interface from pc to multilink allows for fast, easy programming and debugging -- with the ease and patibility of the usb interface.

　　· patible with hc08 family of microcontrollers.

　　· draws power from usb interface-- no separate power supply required (draws less than 1ma from the target).

　　· target voltage: 2,3,5v driven to target, up to 125ma.

　　· target frequency: 1mhz-8mhz

　　· can optionally drive a clock to the target

　　· auto-frequency detection + trimming capabilities for some hc08 devices.

　　· auto-frequency detection for hc08 devices.

　　· p&e's pkg08sz gui proramming and debugging software can be downloaded at no charge

　　· for ed programming, cprog08sz mand-line programming software is available for purchase.

　　· includes usb cable, type a male to type b male, 6-ft.

　　李 进

　　深圳博瑞图电子科技有限公司

　　tel :

　　mob :

　　fax :

　　add :深圳市福田区福明路雷圳大厦西座503

　　email :lijin810230@163.

　　网 址：