ATWINC3400-XSTK 开发板扩展板WILC3400 XPLAINED PRO STARTER KI

　　Introduction

　　The ATWINC3400-XPRO is an extension board to evaluate the performance of the ATWINC3400-MR210CA, an IEEE® 802.11 b/g/n RF/Baseband/MAC Network Controller with Integrated Low Energy Bluetooth® 4.0 compliant module. The ATWINC3400 Xplained Pro extension is designed to provide WiFi® and Bluetooth functionality in 2.4 GHz ISM band to the Xplained Pro evaluation platform. This kit provides easy access to the features of the ATWINC3400-MR210CA and explains how to integrate the device in a custom design.

　　Features

　　?The ATWINC3400-MR210CA: IEEE 802.11 b/g/n Link Controller with Integrated Low Energy Bluetooth 4.0 compliant module features the following:

　　–IEEE 802.11 b/g/n 20MHz (1x1) Wi-Fi solution

　　?Single spatial stream, up to 72 Mbps PHY rate in 2.4 GHz ISM band

　　?Network features: Firmware version 1.2.x, TCP, UDP, DHCP, ARP, HTTP, SSL, DNS,and SNTP

　　?Host interface through SPI

　　–Bluetooth Low Energy (BLE) 4.0

　　?Adaptive Frequency Hopping

　　?Host Control Interface (HCI) through high speed UART

　　–Integrated PA, T/R switch and chip antenna

　　–Superior sensitivity and range

　　–On-Chip Network Stack to offload MCU

　　–Integrated flash memory for system software

　　–I2C and UART host interfaces

　　–Operating temperature range of -40 to +85°C

　　?Debug I2C and UART headers

　　?Current Measurement header

　　?Optional SPI flash boot

　　?ATECC508A Crypto Authentication Device

　　–Ideal for IoT node security

　　–Secure hardware-based Key Storage

　　–Internal High-quality FIPS Random Number Generator

　　?Xplained Pro extension hardware identification system

　　? 李 进

　　? 深圳博瑞图电子科技有限公司

　　?MOB :

　　?qq : 52519094

　　?ADD :深圳市福田区中航路都会轩3305

　　?EMAIL :lijin810230@163.COM

　　?网 址：