BOOSTXL-TUSS4470 超声波评估模块ULTRASONIC SENSING BRIDGE DVR

　　Introduction

　　The BOOSTXL-TUSS44x0 EVM is a fully assembled evaluation module (EVM) designed for the combined evaluation of the TUSS44x0 ultrasonic-sensor signal conditioner IC and ultrasonic transducer. The accompanying MSP430F5529 LaunchPad? Development Kit (MSP-EXP430F5529LP) is used as the USB-to-PC GUI communication bridge as an example on how to implement a master MCU to communicate with and control the TUSS44x0 through SPI and GPIO interfaces.

　　NOTE: The BOOSTXL-TUSS44x0 requires an external master controller to evaluate the TUSS44x0. The TUSS44x0 is exclusively a slave device.

　　The MSP-EXP430F5529LP is controlled by commands received from the BOOSTXL-TUSS44x0 EVM GUI, and returns data to the GUI for display and further analysis. If the MSP-EXP430F5529LP is not used, the BoosterPack? Plug-in Module format of the TUSS44x0 EVM allows alternative external master communication to the TUSS44x0.

　　The BOOSTXL-TUSS44x0 incorporates all required circuitry and components for operation with the following features:

　　? TUSS44x0 ultrasonic sensor signal conditioner IC

　　? Multiple test points for various analog and digital signals

　　? Ultrasonic sensing transducer for mono-static time-of-flight measurements

　　? 李 进

　　? 深圳博瑞图电子科技有限公司

　　?MOB :

　　?qq : 52519094

　　?ADD :深圳市福田区中航路都会轩3305

　　?EMAIL : lijin810230@163.COM

　　? 网 址：