DC2296A Analog温度传感器 评估板 EVAL BOARD FOR LTC2983

　　features

　　·directly digitize rtds, thermocouples, thermistorsand diodes

　　·single 2.85v to 5.25v supply

　　·results reported in°c or°f

　　·20 flexible inputs allow interchanging sensors

　　·automatic thermocouple cold junction compensation

　　·built-in standard and user-programmable coefficientsfor thermocouples, rtds and thermistors

　　·configurable 2-, 3- or 4-wire rtd configurations

　　·measures negative thermocouple voltages

　　·automatic burn out, short-circuit and fault detection

　　·buffered inputs allow external protection

　　·simultaneous 50hz/60hz rejection

　　·includes 15ppm/°c (max) reference (i-grade)

　　applications

　　direct thermocouple measurements

　　direct rtd measurements

　　direct thermistor measurements

　　custom sensor applications

　　deion

　　the ltc2983 measures a wide variety of temperaturesensors and digitally outputs the result, in°c or°f, with0.1°c accuracy and 0.001°c resolution. the ltc2983 canmeasure the temperature of virtually all standard (type b,e,j, k, n, s, r, t) or custom thermocouples, automaticallycompensate for cold junction temperatures and linearizethe results. the device can also measure temperature withstandard 2-, 3- or 4-wire rtds, thermistors and diodes. ithas 20 reconfigurable analog inputs enabling many sen-sor connections and configuration options. the ltc2983includes excitation current sources and fault detectioncircuitry appropriate for each type of temperature sensor.the ltc2983 allows direct interfacing to ground referencedsensors without the need for level shifters, negative supplyvoltages, or external amplifiers. all signals are buffered andsimultaneously digitized with three high accuracy, 24-bit a∑adcs, driven by an internal 15ppm/°c (maximum) reference.