Microsemi flashpro5下载器FlashPro Hardware Programmer

　　Microsemi flashpro5下载器FlashPro Hardware Programmer

　　FlashPro series of hardware programmers saves you board space because a single JTAG chain can be used for all JTAG devices. In-system programming using the JTAG port adds the flexibility of field upgrades or post-assembly production-line characterization. Production costs are significantly reduced as a result of elimination of expensive sockets on the board.

　　All FlashPro programmers use JEDEC-standard STAPL files, meaning there are no algorithms built into the software. Hence, all FlashPro hardware programmers are supported by each FlashPro software and user interface support, You do not have to replace software while you switch from one hardware programmer to another.

　　The FlashPro series of programmers can also be used for interactive debug of designs using embedded IP in the flash FPGAs in conjunction with FlashPro's on-chip debug or Synopsys ®Identify Microsemi Editionsoftware. FlashPro's on-chip debug feature allows access to SmartFusion and Fusion-specific peripherals such as flash memory, analog-to-digital converter (ADC) and other FPGA and design-specific information used for verifying the implemented design.

　　Key Features

　　Supports in-system programming

　　Supports IEEE 1149 JTAG programming through STAPL

　　Supports IEEE 1532

　　Connections to parallel port and USB port available

　　Self-test option

　　Uses Microsemi FlashPro software, available as part of Libero ® System on Chip (SoC) or Libero ® Integrated Development Environment (IDE). Also available standalone.

　　Free software update

　　Features parison of Hardware Programmers